Figure 69. Installing the heat sink
Next steps
1.
2. Follow the procedure listed in
After working inside your system
3. While booting, press F2 to enter System Setup and verify that the processor information matches the new system configuration.
4. Run the system diagnostics to verify that the new processor operates correctly.
Power supply unit
NOTE:
section.
Removing the power supply unit blank
Prerequisites
1. Follow the safety guidelines listed in
.
Steps
Remove the PSU blank in the bay by pulling the blank outward.
CAUTION:
To ensure proper system cooling, the PSU blank must be installed in the second PSU bay in a non-redundant
configuration. Remove the PSU blank only if you are installing a second PSU.
90
Installing and removing system components
