Environmental specifications
The sections below contains information about the environmental specifications of the system.
Temperature specifications
Table 12. Temperature specifications
Temperature
Specifications
Storage
–40°C to 65°C (–40°F to 149°F)
Continuous operation (for altitude less than 950 m or 3117 ft)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the
equipment.
Maximum temperature gradient (operating and storage)
20°C/h (36°F/h)
NOTE:
Some configurations require a lower ambient temperature for more information, see the Standard operating temperature
specifications.
Relative humidity specifications
Table 13. Relative humidity specifications
Relative humidity
Specifications
Storage
5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere
must be non-condensing at all times.
Operating
10% to 80% relative humidity with 29°C (84.2°F)
Maximum vibration specifications
Table 14. Maximum vibration specifications
Maximum vibration
Specifications
Operating
0.26 Grms at 5 Hz to 350 Hz (all operation orientations).
Storage
1.88 Grms at 10 Hz to 500 Hz for 15 min (all six sides tested).
16
Technical specifications
Содержание E43S Series
