manualshive.com logo in svg

Dell E Series, Инструкция по установке

Поделиться
Скачать
Dell E Series Скачать руководство пользователя страница 1

Dell

®

 E Series Monitor VESA 

Mounting Bracket Installation 
Instructions

The VESA mounting bracket enables a Wyse cloud client to be mounted to the Dell E 
Series Monitor. The bracket attaches to the monitor (a #1 Phillips-head screwdriver is 
required), the cloud client is inserted in a vertical position, and then cables are 
attached. 

Note

: If using a 22- or 23-inch Dell E Series Monitor, the monitor base extension must 

be used. 

Note

: If using an E2414 Monitor, the P series mounting bracket must be used.

Wyse Cloud Clients Using this

 

Bracket

Wyse models D class, P25, and T class may use the Dell E Series Monitor VESA 
Mounting Bracket. (Shown below are D and T class on monitors having the attached 
base extension.)

Note

: Mount the cloud client only as shown; improper orientation (where the back 

panel or front panel is facing down) could restrict the airflow of heat from the device 
and damage it.

Note

: Do not enclose the cloud client in a confined environment without proper 

ventilation.

Содержание E Series






Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды