NOTE: The IG signal can be used to gracefully shutdown or enter low-power state when the vehicle is turned off (battery
powered). It can also be used for powering on the Edge Gateway when the vehicle starts.
Right view
Table 6. Right view—3002
Features
1
CANbus port
Enables the CANbus connection.
2
USB 2.0 port
1
Connect a USB enabled device. Provides data transfer speeds up
to 480 Mbps.
3
Ethernet port two (Non-PoE)
Connect an Ethernet (RJ45) cable for network access. Provides
data transfer speeds up to 10/100 Mbps.
1
USB power is limited to 0.4 A/2 W.
Table 7. CANbus-port pin definition details
Features
1
GND
Ground
2
CAN-H
High-level CANbus line
3
CAN-L
Low-level CANbus line
10
