Dell D15S, Руководство по обслуживанию

Страница: 25 / 91

Steps
1. Align the solid-state drive with the socket on the system board and slide it in.
2. Replace the single (M2X3) screw that secures the M.2 solid-state drive to the system board.
Next steps
1. Install the 2.5/3.5-inch hard-drive caddy .
2. Install the front bezel .
3. Install the side cover .
4. Follow the procedure in after working inside your computer .
Removing the M.2 2280 solid-state drive
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Remove the front bezel .
4. Remove the 2.5/3.5-inch hard-drive caddy .
About this task
The following images indicate the location of the M.2 2280 solid-state drive and provide a visual representation of the removal
procedure.
Removing and installing components 25