Dell D15S, Руководство по обслуживанию

Страница: 15 / 91

Steps
1. Place the side cover onto the system aligning the tabs on the chassis.
2. Slide the side cover towards the front of the computer until you hear the release latch click.
Next steps
1. Follow the procedure in after working inside your computer .
Intrusion switch
Removing the intrusion switch
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
About this task
The following image indicate the location of the intrusion switch and provide a visual representation of the removal procedure.
Steps
1. Press down on the latch on the intrusion switch cable and disconnect it from the connector on the system board.
2. Slide the intrusion switch and lift it away from the computer .
Installing the intrusion switch
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
Removing and installing components 15