
Virtualization support
Table 31. Virtualization Support
Option
Description
Virtualization
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by the Intel Virtualization technology.
•
Enable Intel Virtualization Technology
This option is set by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by the Intel Virtualization technology for direct I/O.
•
Enable VT for Direct I/O
This option is set by default.
Wireless options
Table 32. Wireless
Option
Description
Wireless Device Enable
Allows you to enable or disable the internal wireless devices.
The options are:
•
WLAN/WiGig
•
Bluetooth
All the options are enabled by default.
Maintenance
Table 33. Maintenance
Option
Description
Service Tag
Displays the service tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
SERR Messages
Controls the SERR message mechanism. This option is set by default. Some graphics cards require that
the SERR message mechanism be disabled.
BIOS Downgrade
Allows you to flash previous revisions of the system firmware.
•
Allow BIOS Downgrade
This option is set by default.
Data Wipe
Allows you to securely erase data from all internal storage devices.
•
Wipe on Next Boot
This option is not set by default.
BIOS Recovery
BIOS Recovery from Hard Drive
—This option is set by default. Allows you to recover the corrupted
BIOS from a recovery file on the HDD or an external USB key.
NOTE:
BIOS Recovery from Hard Drive field must be enabled.
34
System setup