Dell ChengMing 3901 Tower, Руководство по обслуживанию

Страница: 34 / 81

3. Remove the four (6-32) screws that secure the hard-disk drive to the chassis..
4. Lift the hard drive off the hard-drive carrier.
NOTE: Note the orientation of the hard drive so that you can replace it correctly.
Installing the 3.5-inch hard drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the 3.5-inch hard drive and provides a visual representation of the installation
procedure.
Steps
1. Locate the 3.5-inch hard drive slot on the chassis.
2. Align the tabs on the hard-drive cage with the slots on the chassis and slide the hard-drive cage into the chassis.
3. Replace the four (6-32) screws that secure the hard-drive cage to the chassis.
4. Connect the data and power cables to the hard drive.
Next steps
1. Install the front bezel .
2. Install the side cover .
3. Follow the procedure in After working inside your computer .
34 Removing and installing components