Dell C9000 series, Справочное руководство

Страница: 96 / 2286

Version Description
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information The password is listed in the configuration file; you can view the password by entering
the
show running-config ftp
command.
Use the
ip ftp password
command when you use the
ftp: parameter
in the
copy
command.
Related
Commands
ip ftp username — sets the user name for the FTP sessions.
ip ftp source-interface
Configure an interface’s IP address as the source IP address for FTP connections.
C9000 Series
Syntax
ip ftp source-interface interface
To delete an interface, use the
no ip ftp source-interface interface
command.
Parameters
interface Enter the following keywords and slot/port or number
information:
• For Loopback interfaces, enter the keyword
loopback
then a number from zero (0) to 16383.
• For a Port Channel interface, enter the keyword
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
Control and Monitoring 96