Dell C9000 series, Справочное руководство

Страница: 937 / 2286

Version Description
6.4.1.0 Introduced
Usage Information You cannot delete the Null interface. The only configuration command possible in a
Null interface is
ip unreachables
.
Example
Dell(conf)# interface null 0
Dell(conf-if-nu-0)#
Related
Commands
• interface — configures a physical interface.
• interface loopback — configures a Loopback interface.
• interface port-channel — configures a port channel.
• interface vlan — configures a VLAN.
• ip unreachables — enables generation of internet control message protocol
(ICMP) unreachable messages.
interface range
This command permits configuration of a range of interfaces to which subsequent commands are applied
(bulk configuration). Using the
interface range
command, you can enter identical commands for a range
of interface.
C9000 Series
Syntax
interface range interface , interface ,...
Parameters
interface,
interface,...
Enter the keywords
interface range
and one of the
interfaces — slot/port, port-channel, or VLAN number. Select
the range of interfaces for bulk configuration. You can enter up
to six comma-separated ranges. Spaces are not required
between the commas. Comma-separated ranges can include
VLANs, port-channels, and physical interfaces.
Slot/Port information must contain a space before and after the
dash. For example,
interface range tengigabitethernet
0/1 - 5
is valid;
interface range tengigabitethernet
0/1-5
is NOT valid.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 4096.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
Interfaces 937