Dell C9000 series, Справочное руководство

Страница: 682 / 2286

show hardware pfc-nodrop-priority — displays the packets drop count corresponding
to the priority.
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
C9000 Series
Syntax
clear pfc counters [port-type slot/port | stack-unit { unit number
| all } all stack-ports all}] | interface {statistics}]
Parameters
port-type Enter the keywords
port-type
then the slot/port information.
stack-unit unit
number
Enter the keywords
stack-unit
then the stack-unit number to
be cleared.
all stack-ports all Enter the keywords
all stack-ports all
to clear the
counters on all interfaces.
statistics Enter the keyboard
statistics
to clear the hardware PFC
counters.
Defaults none
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information If you do not use the
statistics
parameter, both hardware and DCBx counters clear.
Data Center Bridging (DCB) 682