Dell C9000 series, Справочное руководство

Страница: 604 / 2286

peer-group-name Enter the name of the peer group to apply the filter to all routers
in the peer group.
as-path-name Enter the name of an established AS-PATH access list. If you do
not configure the AS-PATH access list, the default is
permit
(to
allow routes). The maximum is 16 characters.
in Enter the keyword
in
to filter inbound BGP routes.
out Enter the keyword
out
to filter outbound BGP routes.
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
neighbor maximum-prefix
Control the number of network prefixes received.
C9000 Series
Syntax
neighbor { ipv6-address | peer-group-name } maximum-prefix maximum
[ threshold ] [warning-only]
To return to the default values, use the
no neighbor { ipv6-address | peer-
group-name } maximum-prefix maximum [ threshold ] [warning-only]
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-name Enter the name of the peer group.
maximum Enter a number as the maximum number of prefixes allowed for
this BGP router. The range is 1 to 4294967295.
threshold (OPTIONAL) Enter a number to be used as a percentage of the
maximum value. When the number of prefixes reaches this
Border Gateway Protocol 604