Dell C9000 series, Справочное руководство

Страница: 543 / 2286

To return to the default, use the
no timers bgp
command.
Parameters
keepalive Enter a number for the time interval, in seconds, between
keepalive messages sent to the neighbor routers. The range is
from 1 to 65535. The default is
60 seconds .
holdtime Enter a number for the time interval, in seconds, between the
last keepalive message and declaring the router dead. The range
is from 3 to 65535. The default is
180 seconds .
Defaults none
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
MBGP Commands
Multiprotocol BGP (MBGP) is an enhanced BGP that enables multicast routing policy throughout the internet
and connecting multicast topologies between BGP and autonomous systems (ASs).
MBGP on the Dell Networking OS is implemented as per IETF RFC 1858.
BGPv4 is supported in the following:
Version Platform Support
9.9(0.0) C9010
9.2(1.0) Z9500
7.8.1.0 TeraScale and C-Series (MBGP for IPv6)
Border Gateway Protocol 543