Dell C9000 series, Справочное руководство

Страница: 442 / 2286

clear ip bgp
Reset BGP sessions. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting the
TCP connection.
C9000 Series
Syntax
clear ip bgp [vrf vrf-name ] [* | <1–4294967295> | <0.1–
65535.65535> | A.B.C.D {soft {in | out}} | X:X:X:X::X {soft {in |
out}} | dampening | flap-statistics | ipv4 | ipv6 | peer-group]
Parameters
vrf vrf-name Enter the keyword
vrf
and then the name of the VRF to clear all
BGP sessions corresponding to that VRF.
NOTE: Use this attribute to clear a BGP instance
corresponding to either a specific address family in a
default VRF or an IPv4 address family in a a non-default
VRF.
* Enter an asterisk ( * ) to reset all BGP sessions.
<1-4294967295> Enter <1-4294967295> to clear peers with the AS number.
<0.1-65535.65535
> Enter <0.1-65535.65535> to clear peers with the AS number in
dot format.
A.B.C.D Enter the BGP neighbor address in the A.B.C.D format to clear.
X:X:X:X::X Enter the BGP neighbor address in the X:X:X:X::X format to clear.
soft (OPTIONAL) Enter the keyword
soft
to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
NOTE: If you enter the
clear ip bgp ip-address
soft
command, both inbound and outbound policies
are reset.
in (OPTIONAL) Enter the keyword
in
to activate only inbound
policies.
out (OPTIONAL) Enter the keyword
out
to activate only outbound
policies.
NOTE: You must execute the
clear ip bgp soft
out
command when ever there is a change in the local
policy. If you do not run this command after a local
policy change, then these policy changes are not
reflected in the responses to the peer’s route refresh
messages.
Border Gateway Protocol 442