Dell C9000 series, Справочное руководство

Страница: 2163 / 2286

• a minus sign (-) then a number from 1 to 23 as the number
of hours.
Defaults Not configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information Coordinated universal time (UTC) is the time standard based on the International
Atomic Time standard, commonly known as Greenwich Mean time. When determining
system time, include the differentiator between UTC and your local timezone. For
example, San Jose, CA is the Pacific Timezone with a UTC offset of -8.
debug ntp
Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
C9000 Series
Syntax
debug ntp {adjust | all | authentication | events | loopfilter |
packets | select | sync}
To disable debugging of NTP transactions, use the
no debug ntp {adjust | all |
authentication | events | loopfilter | packets | select | sync}
command.
System Time and Date 2163