Dell C9000 series, Справочное руководство

Страница: 2159 / 2286

The software clock runs only when the software is up. The clock restarts, based on the
hardware clock, when the switch reboots.
Dell Networking recommends using an outside time source, such as NTP, to ensure
accurate time on the switch.
Example
Dell#clock set 16:20:00 19 may 2001
Dell#
clock summer-time date
Set a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis.
C9000 Series
Syntax
clock summer-time time-zone date start-month start-day start-year
start-time end-month end-day end-year end-time [ offset ]
To delete a daylight saving time zone configuration, use the
no clock summer-time
command.
Parameters
time-zone Enter the three-letter name for the time zone. This name is
displayed in the show clock output.
start-month Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
start-day Enter the number of the day. The range is from 1 to 31. You can
enter the name of a month to change the order of the display to
time day month year.
start-year Enter a four-digit number as the year. The range is from 1993 to
2035.
start-time Enter the time in hours:minutes. For the hour variable, use the
24-hour format; example, 17:15 is 5:15 pm.
end-day Enter the number of the day. The range is from 1 to 31. You can
enter the name of a month to change the order of the display to
time day month year.
end-month Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
end-time Enter the time in hours:minutes. For the hour variable, use the
24-hour format; example, 17:15 is 5:15 pm.
System Time and Date 2159