manualshive.com logo in svg

Dell C9000 series, Справочное руководство

Поделиться
Скачать
Dell C9000 series Скачать руководство пользователя страница 2012

Command History This guide is platform-specific. For command information about other platforms, refer 

to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the C-Series and S-Series.

ip dhcp snooping trust

Configure an interface as trusted.

C9000 Series

Syntax

[no] ip dhcp snooping trust

Defaults

Untrusted

Command Modes

INTERFACE

Command History This guide is platform-specific. For command information about other platforms, refer 

to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the C-Series and S-Series.

Security

2012

Содержание C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды