Dell C9000 series, Справочное руководство

Страница: 1928 / 2286

Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Added support for RADIUS.
privilege level (CONFIGURATION mode)
Change the access or privilege level of one or more commands.
C9000 Series
Syntax
privilege mode {level level command | reset command }
To delete access to a level and command, use the
no privilege mode level
level command
command.
Parameters
mode Enter one of the following keywords as the mode for which you
are controlling access:
•
configure
for CONFIGURATION mode
•
exec
for EXEC mode
•
interface
for INTERFACE modes
•
line
for LINE mode
•
route-map
for ROUTE-MAP mode
•
router
for ROUTER OSPF, ROUTER RIP, ROUTER ISIS and
ROUTER BGP modes
level level Enter the keyword
level
then a number for the access level.
The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI
modes and commands.
reset Enter the keyword
reset
to return the security level to the
default setting.
Security 1928