Dell C9000 series, Справочное руководство

Страница: 1837 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
6.1.1.1 Introduced on the E-Series.
Usage Information To configure the minimum and maximum threshold values for user-defined profiles,
use this command. Additionally, to modify the minimum and maximum threshold
values for the pre-defined WRED profiles, use this command. If you delete the
threshold values of the pre-defined WRED profiles, the profiles revert to their original
default values.
Table 7. Threshold Values for the Pre-defined WRED Profiles
Pre-Defined WRED Profile Name Minimum Threshold Maximum Threshold
wred_drop 0 0
wred_ge_y 1024 2048
wred_ge_g 2048 4096
wred_teng_y 4096 8192
wred_teng_g 8192 16384
Related
Commands wred-profile — creates a WRED profile.
trust
Specify dynamic classification (DSCP) or dot1p to trust.
C9000 Series
Syntax
trust {diffserv [fallback]| dot1p [fallback]}
Parameters
diffserv Enter the keyword
diffserv
to specify trust of DSCP markings.
dot1p Enter the keyword
dot1p
to specify trust dot1p configuration.
Quality of Service (QoS) 1837