Dell C9000 series, Справочное руководство

Страница: 1530 / 2286

show ip ospf database
Display all LSA information. If you do not enable OSPF on the switch, no output is generated.
C9000 Series
Syntax
show ip ospf process-id [vrf vrf-name ] database [database-summary]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first OSPF
process.
vrf vrf-name Enter the keyword
vrf
and then the name of the VRF to view
LSA information on OSPF processes corresponding to that VRF.
database-
summary (OPTIONAL) Enter the keywords
database-summary
to the
display the number of LSA types in each area and the total
number of LSAs.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.4(0.0) Added support for VRF on all platforms (Except MXL and
STOMP).
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support of Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1530