Dell C9000 series, Справочное руководство

Страница: 1449 / 2286

other-config-flag
Enable the verification of the advertised other configuration parameter. If this command is not configured, the
verification process is bypassed.
C9000 Series
Syntax
other-config-flag {on | off}
To reset the other configuration parameter, use the
no other-config-flag {on |
off}
command.
Parameters
on Enter the keyword
on
to set the other-config-flag value as ON.
off Enter the keyword
off
to set the other-config flag value as OFF.
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
Neighbor Discovery Protocol (NDP) 1449