Dell C9000 series, Справочное руководство

Страница: 1423 / 2286

forward-delay
The amount of time the interface waits in the Blocking State and the Learning State before transitioning to the
Forwarding State.
C9000 Series
Syntax
forward-delay seconds
To return to the default setting, use the
no forward-delay
command.
Parameters
seconds Enter the number of seconds the interface waits in the Blocking
State and the Learning State before transiting to the Forwarding
State. The range is from 4 to 30. The default is
15 seconds .
Defaults 15 seconds
Command Modes MULTIPLE SPANNING TREE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Introduced.
Related
Commands
max-age — changes the wait time before MSTP refreshes protocol configuration
information.
hello-time — changes the time interval between bridge protocol data units (BPDUs).
Multiple Spanning Tree Protocol (MSTP) 1423