Dell C9000 series, Справочное руководство

Страница: 1415 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the E-Series.
Usage Information The system counts the SA messages originated by itself and those messages received
from the MSDP peers. When the total SA messages reach this limit, the subsequent SA
messages are dropped (even if they pass RPF checking and policy checking).
If the total number of SA messages is already larger than the limit when this command
is applied, those SA messages that are already in the system continue to be accepted.
To enforce the limit in such situation, use the
clear ip msdp sa-cache
command.
Related
Commands
ip msdp peer — configures the MSDP peer.
clear ip msdp peer — clears the MSDP peer.
show ip msdp — displays the MSDP information
ip msdp shutdown
Administratively shut down a configured MSDP peer.
C9000 Series
Syntax
ip msdp shutdown { peer address }
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.).
Defaults Not configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
Multicast Source Discovery Protocol (MSDP) 1415