Dell C9000 series, Справочное руководство

Страница: 1098 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information Although the passive interface does not send nor receive routing updates, the network
on that interface is still included in the IS-IS updates sent using other interfaces.
redistribute
Redistribute routes from one routing domain to another routing domain.
C9000 Series
Syntax
redistribute {static | connected | rip} [level-1 | level-1-2 |
level-2] [metric
metric-value ] [metric-type {external | internal}]
[route-map map-name ]
To end redistribution or disable any of the specified keywords, use the
no
redistribute {static | connected | rip} [metric metric-value ]
[metric-type {external | internal}] [level-1 | level-1-2 |
level-2] [route-map
map-name ]
command.
Parameters
connected Enter the keyword
connected
to redistribute active routes into
IS-IS.
rip Enter the keyword
rip
to redistribute RIP routes into IS-IS.
static Enter the keyword
static
to redistribute user-configured
routes into IS-IS.
metric metric-
value
(OPTIONAL) Assign a value to the redistributed route. The range
is from 0 to 16777215. The default is
0 . Use a value that is
consistent with the destination protocol.
Intermediate System to Intermediate System (IS-IS) 1098