Dell C9000 series, Справочное руководство

Страница: 104 / 2286

Related
Commands
access-class — restricts the incoming connections to a particular IP address in an IP
access control list (ACL).
password — specifies a password for users on terminal lines.
logging coredump server
Configure the switch to move (upload) a core dump for an application or kernel crash to an external FTP
server.
C9000 Series
Syntax
logging coredump server { ipv4-address | ipv6-address } username
name password [ type ] password
Parameters
{ ipv4-address |
ipv6-address }
Enter the server IPv4 address (A.B.C.D) or IPv6 address
(X:X:X:X::X).
name Enter a username to access the target server.
type Enter the password type:
• Enter
0
to enter an unencrypted password.
• Enter
7
to enter a password that has already been
encrypted using a Type 7 hashing algorithm.
password Enter a password to access the target server.
Defaults Core dumps for kernal and application crashes are stored in the local flash of the
Control Processor CPU.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0(1.0) Introduced on the S5000.
Control and Monitoring 104