Import and set a foreign virtual disk as BOSS-N1
About this task
The Import operation sets a foreign virtual disk as native to the configuration.
Steps
1. Enter the
UEFI Configuration Utility
. See
Enter the UEFI Configuration Utility
.
2. Click
Virtual disk information
.
3. Select the virtual disk.
4. Select
Yes
for the option
Would you like to import this virtual disk?
.
NOTE:
This option is only available when the controller detects a foreign disk.
5. Click
OK
, and then click
Import
.
6. Click
Back
untill you return to the screen.
7. Click
Finish
, and then click
Yes
to save the settings.
Create a virtual disk
You can create only one virtual disk.
About this task
To create a virtual disk, perform the following steps:
Steps
1. Enter the
UEFI Configuration Utility
. See
Enter the UEFI Configuration Utility
.
2. Click
Create RAID Configuration
.
3. Select the hard drives.
NOTE:
BOSS supports only single drive RAID 0.
4. Click
Go to RAID Configuration
.
5. Select various options based on the user's need and type the
Name
of the virtual disk.
NOTE:
Adding special characters in the virtual disk name is not supported.
6. Select
Yes
for the option
Would you like to create this virtual disk?
and click
OK
.
7. Click
Accept
.
A virtual disk is created with quick initialization by default.
Delete a virtual disk
About this task
To delete a virtual disk, perform the following steps:
Steps
1. Enter the
UEFI Configuration Utility
. See
Enter the UEFI Configuration Utility
.
2. Click
Delete RAID configuration
.
3. Select the virtual disk.
4. Select
Yes
for the option
Are you sure you want to delete the selected Virtual Disk?
.
5. Click
OK
, and click
Accept
to delete the selected virtual disk.
BOSS-N1 Configuration Utility
27