Figure 5. Remove the BOSS-N1 Monolithic controller module
8. Remove the BOSS power cable and BOSS signal cable from the BOSS-N1 Monolithic controller module.
Install the BOSS-N1 Monolithic controller
About this task
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
Steps
1. Align the BOSS-N1 filler with the BOSS-N1 Monolithic controller module bay and push it into the bay until it clicks into place.
20
Install and remove a BOSS-N1 controllers
