Wireless network setup
90
2. Using a Network-Connected Machine (B1160w only)
8
The window shows the wireless network settings and checks if the
settings are correct. Click
Next
.
•
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown
in the window. If it shows Static, click
Change TCP/IP
to change the
assignment method to DHCP.
•
For the Static method
If the IP address assignment method is Static, check if Static is shown
in the window. If it shows DHCP, click
Change TCP/IP
to enter the IP
address and other network configuration values for the machine.
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer is
set to DHCP, you must contact the network administrator to get the
static IP address.
For example:
If the computer’s network information is as shown below:
-
IP address: 169.254.133.42
-
Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as follows:
-
IP address: 169.254.133.
43
-
Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
-
Gateway: 169.254.133.
1
9
When the wireless network setting is completed, disconnect the USB
cable between the computer and machine. Click
Next
.
10
The
Wireless Network Setting Complete
window appears.
Select
Yes
if you accept the current settings and continue the setup
procedure.
Select
No
if you want to return to the beginning screen.
Then, click
Next
.
11
Click
Next
when the
Confirm Printer Connection
window appears.
12
Select the components to be installed. Click
Next
.
13
After selecting the components, you can also change the machine name,
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click
Next
.
14
After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click
Print a test page
.
Otherwise, just click
Next
and go to step 16.
15
If the test page prints out correctly, click
Yes
.
If not, click
No
to reprint it.
16
Click
Finish
.