82
2. Using a Network-Connected Machine (B1160w only)
IPv6 configuration
IPv6
is supported properly only in Windows Vista or higher.
If the IPv6 network seems to not be working, set all the network setting to
the factory defaults and try again.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
5
From the Embedded Web Service
You need to access
Embedded Web Service
first using the IPv4 address
and follow the below procedure to use IPv6.
1
Access a web browser, such as Internet Explorer, from Windows.
Enter
the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and
press the Enter key or click
Go
.
2
If it’s your first time logging into
Embedded Web Service
you need to
log-in as an administrator.
Type in the below default ID and password
.
•
ID: admin
•
Password: dell00000
3
When the
Embedded Web Service
window opens, move the mouse
cursor over the
Settings
of the top menu bar and then click
Network
Settings
.
4
Click
TCP/IPv6
on the left pane of the website.
5
Check the
IPv6 Protocol
check box to activate IPv6.
6
Check the
Manual Address
check box. Then, the
Address/Prefix
text
box is activated.
7
Enter the rest of the address (e.g.,:3FFE:10:88:194::
AAAA
. “A” is the
hexadecimal 0 through 9, A through F).
8
Choose the DHCPv6 configuration.
9
Click the
Apply
button.
Using Embedded Web Service
1
Start a web browser, such as Internet Explorer, that supports IPv6
addressing as a URL.
2
Select one of the IPv6 addresses (
Link-local Address
,
Stateless
Address
,
Stateful Address
,
Manual Address
) from
Network
Configuration Report
(see "Printing a network configuration report" on
page 77).
3
Enter the IPv6 addresses (e.g.,: http://[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.