Network Basics
Dell 7130cdn Professional Color Printer
User Guide
29
4. Select
File
, then select
Server Properties
from the drop-down list.
5. On the
Drivers
tab, click the
Add
button.
6. Click
Next
, select
Have Disk
, then click
OK
.
7. Browse to the 32-bit driver on the
Software and Documentation CD
, and open the
Windows
folder.
8. Open the appropriate language folder, select the .inf file, then click
OK
.
9. Choose your
Printer
, then click
Next
.
10. Select
Intel Box for Windows XP
, then click
Next
.
11. Click
Finish
.
12. In the
My Network Places
dialog box, double-click the 64-bit system, then select
Yes
.
Windows 2000 or Later Troubleshooting
Note:
For Windows XP, select Classic Look or the Windows XP procedures will not match the
steps below. To select Classic Look, click
Start
>
Control Panel
>
Taskbar and Start Menu
.
Select the
Start Menu
tab, then select
Classic Start menu
. Click
OK
.
This Troubleshooting section assumes you have completed the following tasks:
•
Loaded a Dell printer PCL or PostScript printer driver.
•
Printed and kept a current copy of the Configuration page.
Verifying Settings
To verify settings:
1. Verify the settings on the Configuration page.
•
IP Address Source
is set to:
DHCP
,
Control Panel
,
BOOTP
, or
Auto IP
(depending on
your network configuration).
•
Current IP Address
is set correctly. (Note this address if it is assigned by Auto IP, DHCP,
or BOOTP.)
•
Subnet Mask
is set correctly (if used).
•
Default Gateway
is set correctly (if used).
•
LPR
is enabled. Verify that the LPR and AppSocket settings are set as desired.
•
Interpreters
:
Auto
,
PCL
, or
PostScript
(depending on your driver).
2. Verify that the client is logged into the network and printing to the correct print queue. The
user should also have access to the Dell printer queue.
Verifying Driver Installation
To verify driver installation:
1. Right-click
My Network Places
on the desktop, then click
Properties
.
2. Right-click
Local Area Connection
, then click
Properties
.
3. Select the
General
tab. View the list of installed network protocols to verify that TCP/IP is
installed. (For more information, contact your network administrator.)
4. Click
Install
to install any components not listed, then restart your computer.
