Dell 6400 - Inspiron Laptop Скачать руководство пользователя страница 1

Страница: 1 / 45

Dell™ Inspiron™ 6400/E1505 Service Manual

Notes, Notices, and Cautions

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see "Glossary" in the

Owner's Manual

If you purchased a Dell™ n Series computer, any references in this document to Microsoft®

Windows

operating systems are not applicable.

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo, and

Inspiron

are trademarks of Dell Inc.;

Microsoft

and

Windows

are registered trademarks of Microsoft Corporation;

Bluetooth

is a

registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Model PP20L

February 2006 Rev. A00

Before You Begin

System Components

Optical Drive

Hard Drive

Memory Module(s)

Modem

Mini-Card

Internal Card With Bluetooth

Wireless Technology

Hinge Cover

Keyboard

Display Assembly

Palm Rest

Coin-Cell Battery

Speakers

Processor Thermal-Cooling Assembly

Processor Module

Video Card/Thermal-Cooling Assembly

System Fan

ExpressCard/Hard-Drive Bay Assembly

System Board

Battery Latch Assembly

Flashing the BIOS

Pin Assignments for I/O Connectors

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Содержание 6400 - Inspiron Laptop














































Результаты поиска

Содержание 6400 - Inspiron Laptop

Отзывы:

Похожие инструкции для 6400 - Inspiron Laptop

Бренды по названию

Популярные бренды

Dell 6400 - Inspiron Laptop, Руководство по обслуживанию

Результаты поиска

Содержание 6400 - Inspiron Laptop

Отзывы:

Похожие инструкции для 6400 - Inspiron Laptop

Бренды по названию

Популярные бренды