3. To remove the WLAN card:
a. Remove the single M2L3 screw that secures the tab to the WLAN card [1].
b. Lift the tab that secures the WLAN card [2].
c. Disconnect the WLAN cables from the connectors on the WLAN card [3].
d. Slide the WLAN card from the connector on the system board [4].
Installing the WLAN card
1. Install the WLAN card to the connector on the system board.
2. Connect the WLAN cables to the connectors on the WLAN card.
3. Place the securing tab on the WLAN card and tighten the M2L3 screw on the computer.
4. Install the:
a.
b.
c.
d.
After working inside your computer
.
Memory modules
Removing the memory module
Before working inside your computer
.
24
Disassembly and reassembly
