Dell 302-004-341, Руководство пользователя

Страница: 46 / 70

5. For every node, repeat all previous steps.
6. When all IP addresses are configured on all nodes, open the command prompt
on a node and ping all data IP addresses of the other nodes to ensure that you
have the correct connectivity on each node:
ping <x.x.x.x>
Where <x.x.x.x> represents the data IP address).
Results
The network configuration on the Windows node is complete. For Windows servers
using the X710 network controller, continue by changing the driver parameters for
each port on the NIC. Otherwise, continue on to disk configuration procedures.
Change the driver parameters
On Windows servers using the X710 network controller, change the driver parameters
for every port on the NIC in order to prevent a continual rebuild/rebalance or MDM
failover on the node.
Procedure
1. Open Network and Sharing Center.
2. Click Change adapter settings.
Port Configuration
46 Hardware Configuration and Operating System Installation Guide - Windows Servers