Dell 302-004-341, Руководство пользователя

Страница: 16 / 70

Supported hardware configurations
The supported hardware configurations are listed in the EMC Simple Support Matrix
(ESSM) for your software version.
Download the ESSM from https://elabnavigator.emc.com/eln/elnhome . Click Simple
Support Matrices
>
Storage and select the desired product and version.
The following points apply, as well:
l
Boot drive - All configurations have two 120 GB BOSS boot drives (configured as
RAID 1).
l
Switch requirements
One 10 GbE switch is required. Two or more 10 GbE switches may be used for high
availability and load balancing purposes. Separate (one or more) 1 GbE switches
may be used for the management network.
Before you begin connecting the switches, ensure that they are installed and
configured. Do not connect the switches to your organization's network until all
installation and configuration activities are complete.
Each node has four 10 GbE ports. Two are used for internal network
communications. The other two ports are used for VMware high availability, DRS,
and client network traffic.
The switches must have sufficient available network ports to accommodate the
following:
n
Data network 10 GbE switches:
– Two 10 GbE ports per node, per switch
n
Management network switches:
– One 1 GbE and one BMC (iDRAC) port per node.
Network requirements are described later in this document.
Introduction
16 Hardware Configuration and Operating System Installation Guide - Windows Servers