Dell 302-004-341, Руководство пользователя

Страница: 14 / 70

Table 2 Supported operating systems - ScaleIO components (continued)
Operating system Requirement
Hypervisors
l
Hyper-V
ScaleIO Gateway server requirements
Component Requirement
Supported operating systems
l
Windows 2008 R2, 2012 R2, or 2016, including the Visual C++ redistributable 2010
package, 64-bit. Server Core editions are not supported.
Every server requires 2 cores and a minimum of 3 GB available RAM.
Connectivity The following TCP ports are not used by any other application, and are open in the local
firewall of the server: 80 and 443 (or 8080 and 8443).
You can change the default ports. For more information, see “Changing default ports” in the
user documentation.
Supported web browsers
l
Internet Explorer 10, or later
l
Firefox, version 42, or later
l
Chrome, version 45, or later
Java requirements
l
1.8 or later, 64-bit
Other
l
For a Windows Gateway, the Windows Management Instrumentation service must be
enabled on the IM server and on all Windows ScaleIO nodes.
l
Do not install the Gateway on a server on which RFcache will be enabled or on which SDC
will be installed.
l
The Gateway server must have connectivity to all the nodes that are being installed. If you
are using separate networks for management and data, the server must be able to
communicate with both networks.
Prerequisites
The following prerequisites are relevant to using ScaleIO software in the ScaleIO
Ready Node environment.
Connectivity
Ensure that you have the following information at hand:
l
The IP address range, subnet, and Gateway IP addresses for the management and
data network for all servers.
l
The IP address range, subnet, and Gateway IP addresses for the BMC (iDRAC)
port for all servers.
l
All root and administrator passwords that you plan to set or use on the server and
BMC (iDRAC).
To connect via a service PC or laptop computer using SSH/RDP:
Introduction
14 Hardware Configuration and Operating System Installation Guide - Windows Servers