About
Your
Monitor |
15
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the
monitor can automatically reduce its power consumption when not in use. This is
referred to as
Power Save Mode
*. If the computer detects input from the keyboard,
mouse, or other input devices, the monitor automatically resumes functioning. The
following table shows the power consumption and signaling of this automatic power
saving feature.
VESA Modes
Horizontal
Sync
Vertical
Sync
Video
Power
Indicator
Power
Consumption
Normal
operation
Active
Active
Active
White
90 W (maximum)**
47 W (typical)
Active-off
mode
Inactive
Inactive
Blanked
White (blinking)
Less than 0.5 W
Switch off
-
-
-
Off
Less than 0.3 W
Energy Star
Power Consumption
On Mode
32.63 W***
NOTE:
This monitor is
ENERGY STAR
®
-compliant.
* Zero power consumption in OFF mode can only be achieved by disconnecting the
main cable from the monitor.
** Maximum power consumption with max luminance, and USB active.
The OSD functions only in the normal operation mode. When any button is pressed in
the Active-off mode, the following message will be displayed:
*** Energy consumption (On Mode) is tested at 230 Volts / 50 Hz.
This document is informational only and reflects laboratory performance. Your product
may perform differently, depending on the software, components and peripherals you
ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.
