Security screen options
Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password.
NOTE:
You must set the admin password before you set the system or hard drive password.
Deleting the admin password automatically deletes the system password and the hard drive
password.
NOTE:
Successful password changes take effect immediately.
Default setting: Not set
System Password
Allows you to set, change, or delete the system password.
NOTE:
Successful password changes take effect immediately.
Default setting: Not set
Internal HDD-0
Password
Allows you to set, change, or delete the password on the system's internal hard-disk drive.
NOTE:
Successful password changes take effect immediately.
Default Setting: Not set
Internal HDD-1
Password
Allows you to set, change, or delete the password on the system's internal hard-disk drive.
NOTE:
Successful password changes take effect immediately.
Default Setting: Not set
Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting:
Allow Non-Admin Password Changes
is selected.
UEFI Capsule
Firmware Update
This option controls whether the system allows the BIOS updates through UEFI capsule update packages. This
option is enabled by default.
Non-Admin Setup
Changes
Allows you to determine whether changes to the setup options are allowed when an Administrator Password is
set. If disabled the setup options are locked by the admin password.
TPM 2.0 Security
Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
•
TPM On
(enabled by default)
•
Clear
•
PPI Bypass for Enabled Commands
•
PPI Bypass for Disabled Commands
•
PPI Bypass for Clear Command
•
Attestation Enable
(enabled by default)
•
Key Storage Enable
(enabled by default)
•
SHA-256
(enabled by default)
•
Disabled
•
Enabled (enabled by default)
NOTE:
To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).
Computrace
Allows you to activate or disable the optional Computrace software The options are:
•
Deactivate
•
Disable
•
Activate
NOTE:
The Activate and Disable options will permanently activate or disable the feature and no
further changes are allowed
Default setting: Deactivate
20
System setup
Содержание 1456653
Страница 1: ...Dell Vostro 3471 Setup and specification guide Regulatory Model D13S Regulatory Type D13S003 ...
Страница 6: ...3 Connect the display 4 Connect the power cable 6 Set up your computer ...
Страница 7: ...5 Press the power button Set up your computer 7 ...
Страница 28: ...Serial IO driver Verify if the drivers for Touchpad IR camera and keyboard and are installed 28 Software ...
