Dell EMC VMAX3 Скачать руководство пользователя страница 13

Страница: 13 / 100

Revision history

Table 2 Revision history

Revision

Description and/or change

12.0

Added note to provide strain relief when host cabling and power are handled
from overhead or wall-mounted.

11.0

Add top routing cover graphic.

10.0

Add line in grounding chapter that both grounding straps must be installed
for chassis to chassis grounding.

9.1

Fixed broken link to overhead routing kit section.

9.0

Added rack grounding chapter

8.2

Removed all references to maintaining .25" between bays.

8.1

Added recommendation for chassis to chassis grounding for multiple bay
systems.

8.0

Modified power consumption and heat dissipation specifications to include
steady state and maximum values.

7.0

Corrected formula for 3rd party rack cabinet width requirements.

6.0

Updated wiring configuration diagrams and content for new 2U PDUs.
Updated power distribution unit recommendations for overhead power.

5.0

Minor edits for consistency and readability.

Added new table row and values for "Storage time (unpowered)" in the
topic, "Shipping and storage environmental requirements."

Added line item to Optical multimode cables topic:
OM4 cables are used for SRDF connectivity over 16 Gb/s Fibre Channel I/O
modules.

4.2

Added information and diagrams for third party racks with vertical
PDUs.

Updated heat dissipation value for system bay 2 in a dual engine
system.

For a 200K: Max heat dissipation changed from 30,975 to 28,912
Btu/Hr.

For a 400K: Max heat dissipation changed from 30,975 to 29,688
Btu/Hr.

Added the following note to PDU and wiring configuration topics:

Note:

The PDU AC power cords (single-phase and three-phase)

extend 74" (188cm) from the PDU chassis and are designed to
reach to the bay floor egress for connection to the customer power
supply. 15' (4.57m) extension cables are provided.

4.1

Update: Statement re: redundant PDUs.

Added note to Power and heat dissipation topic.

Preface

Dell EMC

™

VMAX3

™

Family Site Planning Guide VMAX 100K, VMAX 200K, and VMAX 400K

Содержание VMAX3





































































































Результаты поиска

Содержание VMAX3

Отзывы:

Бренды по названию

Популярные бренды

Dell EMC VMAX3, Руководство по планировке объекта

Результаты поиска

Содержание VMAX3

Отзывы:

Бренды по названию

Популярные бренды