manualshive.com logo in svg

Dell EMC Vblock Systems 350, Руководство администратора

Dell EMC Vblock Systems 350 - это унифицированный платформенный продукт для центров обработки данных, который упрощает администрирование и управление Вашей ИТ-инфраструктурой. Скачайте бесплатно Руководство по администрированию с manualshive.com и получите полезные инструкции по использованию этой мощной системы.

Поделиться
Скачать
background image

•

Possible VMware vSphere.local domain inconsistencies after restoring a VMware
vCenter server Single Sign-On 5.5 or Platform Services Controller 6.0 Node (2086001):

https://kb.vmware.com/selfservice/microsites/search.do?
language=en_US&cmd=displayKC&externalId=2086001

2

If you are using the VMware Data Protection appliance for a direct-to-host emergency restore
when VMware vCenter server is not available, refer to the VMware 

vSphere 6 Data Protection

Administration Guide

 document for best practices and recommendations and limitations and

unsupported features:

https://docs.vmware.com/en/VMware-vSphere/6.0/vmware-data-protection-administration-
guide-60.pdf

3

If you do not have a tested backup and recovery solution for the VMware vSphere 6.0 PSCs and
VMware vCenter servers, do not proceed with a VMware vSphere 6.0 ELM configuration. ELM
adds complexity to the backup and recovery solution, based on the number of PSCs and VMware
vSphere 6.0 PSCs and VMware vCenter servers have differences in their respective backup
strategies.

Converged System AMP design

Dell EMC manufacturing configures the AMP with VMware vSphere 6.0 using only VMware
recommended topologies. Deployment of the PSC and VMware vCenter using a non-recommended
topology may prevent backing up and restoring a VMware vCenter server environment with a PSC(s).

Review the following link for recommend topologies:

•

VMware vSphere 6.0 Recommended Topologies

https://kb.vmware.com/selfservice/microsites/search.do?
language=en_US&cmd=displayKC&externalId=2108548

Each Converged System participating in ELM must continue to maintain a functioning AMP. To maintain
the original Converged System premise of independence, each Converged System VMware vSphere
environment must not rely on the VMware vSphere infrastructure of another Converged System to
operate correctly. This implies that all VMware vSphere 6.0 management VMs in a Converged System
must use local storage for the AMP-2P M4, or shared VNXe storage for the AMP-2S M4.

External PSCs are required for VMware vSphere 6.0 ELM. Dell EMC does not recommend embedded
VMware PSCs.

Dell EMC does not recommend the deployment of a PSC SSO domain with multiple SSO sites. The
deployment of multiple sites impacts the VMware vSphere 6.0 backup and recovery procedure. Refer to
the following link for backup limitations with multi-site SSO:

•

VMware vSphere 6.0 Backing up and restoring a VMware vCenter server environment:

https://pubs.vmware.com/vsphere-60/index.jsp#com.vmware.vsphere.install.doc/
GUID-539B47B4-114B-49BC-9736-F14058127ECA.html

With VMware vSphere 6.0, you cannot use PSC snapshots with multi-site or HA configurations.
Refer to the following link: FAQ: VMware PSC in VMware vSphere 6.0 (2113115) 

https://

kb.vmware.com/selfservice/microsites/search.do?
language=en_US&cmd=displayKC&externalId=2113115

159

   |   

Configuring VMware Enhanced Linked Mode (vSphere 6.0)

Содержание Vblock Systems 350






















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Vblock Systems 350

GE GNPR40L Owner'S Manual And Installation Instructions preview
GNPR40L
Бренд: GE Страницы: 36
Jam CLASSIC Instruction Book preview
CLASSIC
Бренд: Jam Страницы: 59
Canton Smart Sounddeck 100 Operating Instructions Manual preview
Smart Sounddeck 100
Бренд: Canton Страницы: 58
Canton DIGITAL MOVIE DM 90 Manual preview
DIGITAL MOVIE DM 90
Бренд: Canton Страницы: 68
Canton Reference Manual preview
Reference
Бренд: Canton Страницы: 8
MagicRadar T04 Owner'S Manual preview
T04
Бренд: MagicRadar Страницы: 98
Panasonic SC-PMX9DB Quick Manual preview
SC-PMX9DB
Бренд: Panasonic Страницы: 1
Panasonic SC-AKX18 Operating Instructions preview
SC-AKX18
Бренд: Panasonic Страницы: 2
Panasonic SC-PM02 Operating Instructions preview
SC-PM02
Бренд: Panasonic Страницы: 2
Panasonic SC-PMX90 Owner'S Manual preview
SC-PMX90
Бренд: Panasonic Страницы: 20
R-Tech TIG171 TFT Operation Instructions Manual preview
TIG171 TFT
Бренд: R-Tech Страницы: 57
ViziT VIZIT-M441MG Operating Instruction preview
VIZIT-M441MG
Бренд: ViziT Страницы: 11
Ebode XDOM LIGHTSPEAKER SYSTEM Owner'S Manual And Installation Instructions preview
XDOM LIGHTSPEAKER SYSTEM
Бренд: Ebode Страницы: 228
Gewiss Chorus ANTAS GW19061 Programming Manual preview
Chorus ANTAS GW19061
Бренд: Gewiss Страницы: 148
Dali OBERON C Series Manual preview
OBERON C Series
Бренд: Dali Страницы: 19
Dali PHANTOM H-60 R Manual preview
PHANTOM H-60 R
Бренд: Dali Страницы: 45
Edimax IC-5170SC User Manual preview
IC-5170SC
Бренд: Edimax Страницы: 137
Sharper Image SR277 Instruction Manual preview
SR277
Бренд: Sharper Image Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды