Copyright © 2016 EMC. All rights reserved. Dell, EMC and other trademarks are trademarks of Dell Inc.
or its subsidiaries. P/N 300-015-569 Rev 01
Before you begin
Purpose of this document
Required:
❑
Create an EMC Online Support account:
https://support.emc.com
. You will need this
account later in the installation process to
activate software licenses and configure
ESRS (EMC Secure Remote Services).
❑
If your Unity system arrived pre-racked, begin
installation at Step 4 of this guide.
❑
Obtain the help of a second person to install
the enclosure into the rack, or use a
mechanical lift.
❑
If you have more than one enclosure to install,
use the
Unity Installation Guide
to complete
your installation. The installation guide
includes racking and cabling instructions
required for additional enclosures, which are
not covered here. The
Unity Installation
Guide
is located here:
Recommended:
❑
Download the Connection Utility at
. You will need this utility if you want to
assign static IP addresses to your system. You will not
need this utility if you plan to use DHCP to
automatically assign IP addresses to your system.
❑
If you are installing your system in a location with
restricted internet access, download the Connection
Utility and your license files before starting the
installation process:
❑
Watch the Unity Quick Start Installation video:
❑
Refer to the
What’s next
section for important details
about adding enclosures and using the Unisphere
online help.
Unpack
Record SN
Power Up
Assign
Management
Address
Cable to
Network
Install
Rails
Launch
Unisphere
Install
System
1
5
2
3
7
4
8
6
Dell EMC Unity
™
Quick Start
>
