Dell EMC PowerVault ME484 Скачать руководство пользователя страница 122 | Manualshive

Страница: 122 / 152

background image

Number

Severity

Description/Recommended actions

This is normally used to import into the system an FDE disk that was locked by another system.

Recommended actions:

•

Ensure that the imported disk(s) are integrated into the system.

512

Info.

The system was set to the FDE secured state by a user.
Full Disk Encryption is now enabled. Disks removed from this system will not be readable unless they are

imported into another system.

Recommended actions:

•

No action is required.

513

Info.

The system was set to the FDE repurposed state by a user.
All disks have been repurposed and set to their initial factory states. FDE is no longer enabled on the system.

Recommended actions:

•

No action is required.

514

Info.

The FDE lock key and import key were cleared by a user.
I/O operations may continue as long as the system is not restarted.

Recommended actions:

•

If the system is restarted and access to data is intended, the lock key must be reinstated.

515

Info.

An FDE disk was repurposed by a user.
The disk was reset to its original factory state.

Recommended actions:

•

No action is required.

516

Error

An FDE disk has been placed in the unavailable state.
The related event message 518, which indicates that a disk operation failed, may provide additional

information.

Recommended actions:

•

See the recommended action specified in the event message.

517

Info.

A disk that was formerly in the FDE unavailable state is no longer unavailable.
The disk has returned to normal operations.

Recommended actions:

•

No action is required.

518

Error

An FDE disk operation has failed.
This event provides detail about the operation that failed.

Recommended actions:

•

The disk may need to be removed, imported, repurposed, or replaced.

521

Error

An error occurred while accessing the midplane SEEPROM to store or fetch Full Disk Encryption keys.

122

Events and event messages

«
...
120
121
122
123
124
...
»

Содержание PowerVault ME484

























































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault ME484

Бренд: LEGRAND Страницы: 4

Бренд: ZALMAN Страницы: 34

COSEC COGNIFACE INTEGRA200

Бренд: Matrix Страницы: 16

Бренд: Tripp Lite Страницы: 8

Бренд: DataComm Страницы: 2

Бренд: DAS Страницы: 21

Бренд: Akitio Страницы: 32

ZEUS Z3-MVE-R16

Бренд: Z3 Technology Страницы: 8

SAS JBOD CLI 1.0

Бренд: QNAP Страницы: 18

Бренд: Niles Страницы: 4

Бренд: AirLive Страницы: 91

StoreJet TS500GSJ25C

Бренд: Transcend Страницы: 20

Бренд: Pulsar Страницы: 4

Бренд: ZALMAN Страницы: 49

RAX Secure 212-3QR

Бренд: CRU Страницы: 2

Бренд: CRU Страницы: 2

Бренд: CRU Страницы: 12

MS2 4000 Series

Бренд: 3M Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды