manualshive.com logo in svg

Dell EMC PowerVault MD 3400, Руководство администратора

Поделиться
Скачать
Dell EMC PowerVault MD 3400 Скачать руководство пользователя страница 136

5 

Select either 

With consistency check 

or 

Without consistency check

, and click 

OK

.

A consistency check scans the blocks in a RAID Level 5 virtual disk, or a RAID Level 6 virtual disk and checks the consistency 
information for each block. A consistency check compares data blocks on RAID Level 1 replicated physical disks. RAID Level 0 virtual 
disks have no data consistency.

Changing the pre-read consistency check setting of an overall 
repository virtual disk

Use the 

Pre-Read Consistency Check

 option to define a storage array's capability to pre-read an overall repository virtual disk consistency 

information and determine whether the data of that overall repository virtual disk is consistent. An overall repository virtual disk that has 
this feature enabled returns read errors if the data is determined to be inconsistent by the RAID controller module firmware. You can enable 
this option for overall repository virtual disks that contain consistency information. RAID Level 1, RAID Level 5, and RAID Level 6 maintain 
consistency information.
You can enable this option for overall repository virtual disks that contain consistency information. RAID Level 1, RAID Level 5, and RAID 
Level 6 maintain consistency information.
You can change the Pre-Read Consistency Check for an overall repository for the following storage objects:

•

Snapshot group

•

Snapshot virtual disk

•

Consistency group member virtual disk

•

Replicated Pair

The following guidelines apply:

•

Changing the 

Pre-Read Consistency Check

 setting modifies the setting only for the overall repository that you selected.

•

The 

Pre-Read Consistency Check

 setting is applied to all individual repository virtual disks contained within the overall repository.

•

If an overall repository virtual disk that is configured with pre-read is migrated to a RAID level that does not maintain consistency 

information, the metadata of the overall repository virtual disk continues to show that pre-read is enabled. However, reads to that 

overall repository virtual disk ignores consistency pre-read. If the virtual disk is subsequently migrated back to a RAID level that supports 

consistency, the option becomes available again.

To create a consistency group snapshot virtual disk:

1 

From the AMW, select the 

Storage & Copy Services

 tab.

2 

Select the storage object for which to change the pre-read consistency check settings.

3 

Right click the select object and select 

Overall Repository 

> 

Change Pre-read Consistency Check

.

4 

Select 

Enable pre-read consistency check

, and click 

OK

.

NOTE: 

Enabling the option on overall repository virtual disks without consistency does not affect the virtual disk. However, 

the attribute is retained for that overall repository virtual disk if it is ever changed to one with consistency information.

5 

Click 

Yes

.

Deleting Snapshot Virtual Disk or consistency group Snapshot Virtual Disk

Use the 

Delete Snapshot Virtual Disk

 option to delete a snapshot virtual disk or consistency group snapshot virtual disk that is no longer 

needed for backup or software application testing purposes. You also can specify whether you want to delete the snapshot repository 
virtual disk associated with a read-write snapshot virtual disk or a read-write consistency group snapshot virtual disk or retain the snapshot 
repository virtual disk as an unmapped virtual disk.
When a snapshot virtual disk or consistency group snapshot virtual disk is deleted, the system performs the following actions:

•

Deletes all member snapshot virtual disks—for a consistency group snapshot virtual disk.

•

Removes all associated host mappings.

136

Premium feature—Snapshot Virtual Disk

Содержание PowerVault MD 3400


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды