![Dell EMC PowerEdge T440 Скачать руководство пользователя страница 71](http://html1.mh-extra.com/html/dell-emc/poweredge-t440/poweredge-t440_installation-and-service-manual_2468323071.webp)
Installing caster wheels
Prerequisites
1
Follow the safety guidelines listed in
2
Place the system on its side on a flat, stable surface.
3
If installed,
.
Steps
1
Align the two retention hooks on the rear wheel unit with the two slots on the base of the system, and insert the hooks into the slots.
2
Push the rear wheel unit toward the back of the system and using a Phillips #2 screwdriver secure the unit in place using a single
screw.
3
Align the two retention hooks on the front wheel unit with the two slots on the base of the system, and insert the hooks into the slots.
4
Push the front wheel unit toward the front of the system and using a Phillips #2 screwdriver secure the unit in place using a single
screw.
Figure 23. Installing caster wheels
Next step
Follow the procedure listed in
After working inside your system
Installing and removing system components
71