Icon
Description
Condition
Corrective action
The POST process is interrupted without any video
output due to invalid memory configurations. See
.
Drive indicator
The indicator turns solid amber if
there is a drive error.
•
Check the System Event Log to determine if the
drive has an error.
•
Run the appropriate Online Diagnostics test. Restart
the system, and run embedded diagnostics (ePSA.
•
If the drives are configured in a RAID array, restart
the system, and enter the host adapter configuration
utility program.
Electrical indicator The indicator turns solid amber if the
system experiences an electrical error.
For example, voltage out of range, or
a failed power supply unit (PSU) or
voltage regulator.
Check the System Event Log or system messages for
the specific issue. If it is due to a problem with the PSU,
check the LED on the PSU. Reseat the PSU.
If the problem persists, see
.
Temperature
indicator
The indicator turns solid amber if the
system experiences a thermal error.
For example, the ambient
temperature is out of range or there is
a fan failure.
Ensure that none of the following conditions exist:
•
A cooling fan has been removed or has failed.
•
System cover, air shroud, memory module blank, or
back filler bracket is removed.
•
Ambient temperature is too high.
•
External airflow is obstructed.
If the problem persists, see
.
Memory indicator
The indicator turns solid amber if a
memory error occurs.
Check the System Event Log or system messages for
the location of the failed memory. Reseat the memory
module.
If the problem persists, see
.
PCIe indicator
The indicator turns solid amber if a
PCIe card experiences an error.
Restart the system. Update any required drivers for the
PCIe card. Reinstall the card.
If the problem persists, see
.
NOTE:
For more information about the
supported PCIe cards, see
System health and system ID indicator codes
The system health and system ID button
is on the front panel of your system.
Figure 7. System health and system ID buttons
Dell EMC PowerEdge T440 system overview
17
