Dell EMC PowerEdge R740, Инструкция по установке и обслуживанию

Страница: 15 / 193

iDRAC Quick Sync 2 indicator
code
Condition Corrective action
Sync 2 button to turn on the iDRAC Quick
Sync 2 feature.
Solid white Indicates that iDRAC Quick Sync 2 is ready
to communicate. Press the iDRAC Quick
Sync 2 button to turn off. If the LED fails to turn off, restart the system. If the
problem persists, see
Getting help .
Blinks white rapidly Indicates data transfer activity.
If the indicator continues to blink indefinitely, see
Getting help .
Blinks white slowly Indicates that firmware update is in
progress.
If the indicator continues to blink indefinitely, see
Getting help .
Blinks white five times rapidly and
then turns off Indicates that the iDRAC Quick Sync 2
feature is disabled. Check if iDRAC Quick Sync 2 feature is configured to
be disabled by iDRAC. If the problem persists, see the
Getting help section. For more information, see
Integrated Dell Remote Access Controller User's
Guide
at Dell.com/poweredgemanuals or Dell
OpenManage Server Administrator User’s Guide at
Dell.com/openmanagemanuals > OpenManage Server
Administrator.
Solid amber Indicates that the system is in fail-safe
mode. Restart the system. If the problem persists, see
Getting help .
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly. Restart the system. If the problem persists, see
Getting help .
Right control panel view
Figure 8. Right control panel view
Table 8. Right control panel features
Item Indicator, button, or
connector
Icon Description
1 Power button Indicates if the system is turned on or off. Press the power button to
manually turn on or off the system.
PowerEdge R740 system overview 15