manualshive.com logo in svg

Dell EMC PowerEdge MX7000, Руководство по развертыванию

Поделиться
Скачать
Dell EMC PowerEdge MX7000 Скачать руководство пользователя страница 37

Workload Domain

Hostname

DNS Zone

IP Address

Description

sfo01m01esx03

sfo01.rainpole.local

172.16.11.103

ESXi host 03

sfo01m01esx04

sfo01.rainpole.local

172.16.11.104

ESXi host 04

sfo01m01nsx01

sfo01m01nsxc01

sfo01m01nsxc02

sfo01m01nsxc03

Host names and IP addresses for the operations management 
layer

The operations management layer focuses on the components used for day-to-day management of the Cloud Foundation environment.

Cloud Foundation automatically deploys vRealize Log Insight in the management domain during deployment. Other components within the 
management domain are automatically configured to utilize this vRealize Log Insight instance. With the appropriate licensing in place, this 
vRealize Log Insight instance can also be utilized by other workload domains.

NOTE: 

You must define the hostnames and IP addresses for the vRealize Log Insight components before you deploy Cloud 

Foundation.

NOTE: 

vRealize Operations and vRealize Automation are currently not supported for NSX-T workload domains.

Cloud Foundation automates the deployment of vRealize Operations. This optional component is deployed within the management domain. 
Deployment of vRealize Operations also deploys a virtual machine for vRealize Suite Lifecycle Manager (vRSLCM) and an edge device used 
for load balancing within the management domain. These two components are shared between vRealize Operations and vRealize 
Automation and are automatically installed if either product is deployed.

NOTE: 

You must define the hostnames and IP addresses for the vRealize Operations components to be installed within the 

solution and the shared components, if not previously deployed.

The following table provides an example of the information to be collected for the operations management layer, including the shared 
components with vRealize Automation. If you are deploying both vRealize Operations and vRealize Automation, the shared components are 
installed only once. This example uses a DNS domain called 

rainpole.local

 for illustration purposes. Modify the sample information to 

conform to the configuration of your site.

Table 8. Configuration for the operations management layer

Component Group

Hostname

DNS Zone

IP Address

Description

vRealize Log insight

sfo01vrli01

sfo01.rainpole.local

172.16.11.70

Virtual IP address of the 
vRealize Log Insight 
integrated load balancer

sfo01vrli01a

sfo01.rainpole.local

172.16.11.71

Master node of vRealize 
Log Insight

sfo01vrli01b

sfo01.rainpole.local

172.16.11.72

Worker node 1 of vRealize 
Log Insight

sfo01vrli01c

sfo01.rainpole.local

172.16.11.73

Worker node 2 of 
vRealize Log Insight

Cloud Foundation and SDDC design considerations

37

Содержание PowerEdge MX7000




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды