Figure 36. Installing expansion cards into the expansion riser 1
Figure 37. Installing an expansion card into the expansion riser 2
Next steps
1
After installing a card into the riser 1, close the PCIe card holder latch.
2
Follow the procedure listed in
After working inside your system
.
3
Install any device drivers required for the card as described in the documentation for the card.
Optional IDSDM or vFlash module
The IDSDM or vFlash module combines the IDSDM or vFlash features into a single module.
NOTE:
The write-protect switch is on the IDSDM or vFlash module.
80
Installing and removing system components