2
Install any device drivers required for the card as described in the documentation for the card.
Removing an expansion card from the expansion card riser
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
If applicable, disconnect the cables from the expansion card.
NOTE:
When removing a card from the riser 1, open the PCIe card holder latch. If applicable, remove the PCIe guide and then
remove the expansion card.
Steps
1
If applicable, lift the expansion card latch(es) out of the slot.
2
Hold the expansion card by its edges, and pull the card until the card edge connector disengages from the expansion card connector
on the riser.
Figure 32. Removing expansion card from riser 1
Installing and removing system components
77