Dell EMC P92F страница 24 Скачать руководство пользователя | Manualshive

Страница: 24 / 60

background image

About this task

NOTE:

This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed in the SSD1 slot.

NOTE:

Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2

2280 solid-state drive in the SSD1 slot.

The following image indicates the location of the M.2 2280 solid-state drive that is installed in SSD1 slot and provides a visual
representation of the removal procedure.

Steps

1. Remove the screw (M2x4) that secures the solid-state drive thermal bracket and the solid-state drive to the system board.
2. Lift the thermal plate off the system board.
3. Slide and lift the solid-state drive off the SSD1 slot.

Installing the M.2 2280 solid-state drive in the SSD1 slot

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

NOTE:

This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed in the SSD1 slot.

NOTE:

Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2

2280 solid-state drive in the SSD1 slot.

NOTE:

Install the solid-state drive mounting bracket, if it is not installed.

The following image indicates the location of the M.2 2280 solid-state drive that is installed in SSD1 slot and provides a visual
representation of the installation procedure.

24

Disassembly and reassembly

«
...
22
23
24
25
26
...
»

Содержание P92F





























































Отзывы:

Нет отзывов

Похожие инструкции для P92F

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 43

Бренд: ZiLOG Страницы: 166

Бренд: Acer Страницы: 26

Бренд: Rousseau Страницы: 7

Бренд: Radio Shack Страницы: 52

Бренд: IBM Страницы: 27

Бренд: DFI Страницы: 69

SIMATIC VPU200-3104

Бренд: Siemens Страницы: 28

SIMATIC Rack PC IL 40

Бренд: Siemens Страницы: 40

SIMATIC PC BI10

Бренд: Siemens Страницы: 45

SIMATIC RI 45 PIII Series

Бренд: Siemens Страницы: 132

Бренд: Siemens Страницы: 194

SIMATIC IPC627D

Бренд: Siemens Страницы: 186

Core 100 Series

Бренд: ASROCK Страницы: 4

Бренд: ASROCK Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды