Dell EMC NX440, Инструкция по установке и обслуживанию

Страница: 75 / 102

2 Follow the procedures in After working inside your system
Storage controller card
Removing the PERC card
Prerequisites
1 Follow the safety guidelines listed in Safety instructions
2 Follow the procedures in Before working inside your system
3 Remove the expansion card riser.
Steps
1 Remove the screw securing the blue release latch.
2 Rotate the blue release latch to disengage it from the PERC card.
3 Push the blue release latch until the tab clicks into the slot on the system.
4 Hold the PERC card by the edges and pull it to disengage it from the PERC card slot.
5 Flip the PERC card and disconnect the cable from the PERC card.
Figure 42. Removing the PERC card
Next step
1 Install the PERC card
Installing the PERC card
Prerequisites
1 Follow the safety guidelines listed in Safety instructions
2 Follow the procedures in Before working inside your system
3 Remove the expansion card riser.
Disassembly and reassembly 75